七麦数据

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB, DMZA, DNAA, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUUB, CXHA, DBGC, DBGC, DCXA, DCYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB.

BETA support for CUSA, CUSB, CUTA, CXEB, CXFA, CXXB, DDYA, DMZA, DNAA.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

The application will connect to a standard Bluetooth Low Energy (BLE/Bluetooth 4.0+) OBD2 adaptor with an ELM327 chip, typically available from retailers for as little as £10 (GBP).
It is crucial that the adaptor supports Bluetooth Low Energy (Bluetooth 4.0+) and is confirmed to work with iOS.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUUB, CXHA, DBGC, DBGC, DCXA, DCYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB.

BETA support for CUSA, CUSB, CUTA, CXEB, CXFA, CXXB, DDYA, DMZA, DNAA.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

The application will connect to a standard Bluetooth Low Energy (BLE/Bluetooth 4.0+) OBD2 adaptor with an ELM327 chip, typically available from retailers for as little as £10 (GBP).
It is crucial that the adaptor supports Bluetooth Low Energy (Bluetooth 4.0+) and is confirmed to work with iOS.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUUB, CXHA, DBGC, DBGC, DCXA, DCYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB.

BETA support for CUSA, CUSB, CUTA, CXEB, CXFA, CXXB, DDYA, DMZA, DNAA.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

The application will connect to a standard Bluetooth Low Energy (BLE/Bluetooth 4.0+) OBD2 adaptor with an ELM327 chip, typically available from retailers for as little as £10 (GBP).
It is crucial that the adaptor supports Bluetooth Low Energy (Bluetooth 4.0+) and is confirmed to work with iOS.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAYA, CAYC, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUUB, DBGC, DBGC, DCXA, DCYA, DFCA, DFFA, DFGA, DFLA, DFSB, DFSF, DLUB.

BETA support for CAGA, CAHA, CAPA, CCWA, CXHA, DGTC, DGTD, DGTE.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

The application will connect to a standard Bluetooth Low Energy (BLE/Bluetooth 4.0+) OBD2 adaptor with an ELM327 chip, typically available from retailers for as little as £10 (GBP).
It is crucial that the adaptor supports Bluetooth Low Energy (Bluetooth 4.0+) and is confirmed to work with iOS.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAYA, CAYC, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUUB, DBGC, DBGC, DCXA, DCYA, DFCA, DFFA, DFGA, DFLA, DFSB, DFSF, DLUB.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!